8. Printing on Postcard Size Paper
● AS postcards do not absorb ink well, offset images may appear on the rear side of
following prints. TO avoid th~, reduce the printing speed and place a sheet of paper on
—
top of each printed postcard.
-Postcard size original
1.Place the postcard sized paper on the
II
paper feed table.
● Make sure that the paper feed side plates contact the paper lightly.
2.Set the original guides to match the postcard size original.
3.Insert the origin~ face down into the original table until it stops.
4.Make the prints. (See page 14 to 17.)
The original is larger than postcard and the image is postcard size.
|
| 1. | Place | the | postcard | size | paper on the |
f | 1 | I | paper | feed | table. |
|
|
|
|
| ● Make sure that the | paper | feed side plates | ||
|
|
| contact the paper lightly. |
| |||
2.Cut the leading edge of the original as shown in the illustration. Leave 15 mm/O.6’’(9/l6”) margin when you cut.
Paper Feed
D Irectlo n
x
3.Insert the original face down into the original table until it stops.
4.Make the prints. (See page 14 to 17.)
23
