1.Top Unit
2.Original Guides
3.Original Table
4.Original Table Release Lever
5.Feed Roller Pressure Lever
6.Separation Roller Pressure Lever
7.Paper Feed Side Plate
8.Paper Feed Table
9.Side Plate Fine Adjusting Dial
10.Front Door
11.Paper Delivery Table
12.Operation Panel
13.Original Tray
Open to remove the misfed original.
Adjust these guides to position the originals correctly.
Place the originals on this table.
Use to open the original table unit to the left for master installation.
Use to adjust the contact pressure of the paper feed roller according to paper thickness.
Use to adjust the separation roller pressure to prevent double feed.
Use to prevent paper skew.
Set the paper on this table.
Use to shift the paper feed table sideways.
Open for access to the inside of the machine.
Completed prints are delivered here.
Operator controls and indicators are located here.
Originals used to make a master are delivered to this tray.
