Specifications
Power source | 14.4 V DC (10.8 V to 15.1 V allowable) |
Grounding system | Negative type |
Current consumption | 28 A (at continuous power, 4 Ω) |
Average current drawn* | 10 A (4 Ω for four channels) |
| 20 A (4 Ω for two channels) |
| 20 A (2 Ω for four channels) |
Fuse | 30 A ⋅ 2 |
Dimensions | 304 (W) ⋅ 56 (H) ⋅ 195 (D) mm |
Weight | 3.0 kg (Leads for wiring not included) |
Maximum power output | 150 W ⋅ 4 (4 Ω) / 600 W ⋅ 2 (4 Ω) |
Continuous power output | 75 W ⋅ 4 (at 14.4 V, 4 Ω, 20 Hz to 20 kHz 1.0% THD) |
| 300 W ⋅ 2 (at 14.4 V, 4 Ω, 1 kHz 1.0% THD) |
| 150 W ⋅ 4 (at 14.4 V, 2 Ω, 1 kHz 1.0% THD) |
Load impedance | 4 Ω (2 Ω to 8 Ω allowable) |
| (Bridge connection: 4 Ω to 8 Ω allowable) |
Frequency response | 10 Hz to 50 kHz (+0 dB, |
100 dB | |
Distortion | 0.005 % (10 W, 1 kHz) |
Separation | 70 dB (1 kHz) |
| 60 dB (100 Hz to 10 kHz) |
Low pass filter | Cut off frequency: 40 Hz to 500 Hz |
| Cut off slope: |
High pass filter | Cut off frequency: 40 Hz to 500 Hz |
| Cut off slope: |
Gain control | RCA: 400 mV to 6.5 V |
| Speaker: 1.6 V to 26 V |
Maximum input level / impedance | RCA: 6.5 V / 22 kΩ |
| Speaker: 26 V / 90 kΩ |
Note:
•Specifications and the design are subject to possible modification without notice due to improvements.
*Average current drawn
•The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers.
13
