Pioneer PRS-D410 owner manual Connecting the Power Terminal, Connecting the Unit

Connecting the Unit

Connecting the Power Terminal

•Always use the special red battery and ground wire [RD-223], which is sold separately. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

1.Pass the battery wire from the engine compartment to the interior of the vehicle.

•After making all other connections to the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery.

Fuse (30 A) Engine		Interior of
compart-		the vehicle
ment
Fuse (30 A)	Drill a 14 mm
Positive terminal	hole into the
Insert the O-ring rubber	vehicle body.
grommet into the vehicle
body.

2.Twist the battery wire, ground wire and system remote control wire.

Twist

3.Attach lugs to wire ends. Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

Lug

Ground wire

Lug

Battery wire

4.Connect the wires to the terminal.

•Fix the wires securely with the terminal screws.

	GND terminal
Power terminal	System remote
	control terminal
	System remote
	control wire
	Ground wire

Battery wire

WARNING

Failure to securely fasten the battery wire to the ter- minal using the terminal screws could cause the ter- minal area to overheat and could result in damage and injury including minor burns.

7