Installation

CAUTION

• Do not install in:

—Places where it could injure the driver or pas- sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s seat.

•Make sure that wires are not caught in the sliding mechanism of the seats, resulting in a short-cir- cuit.

•Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Protect all cables and important equipment such as fuel lines, brake lines and electrical wiring from damage.

•Install tapping screws in such a way that the screw tip does not touch any wire. This is impor- tant to prevent wires from being cut by vibration of the car, which can result in fire.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

•To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the amplifier, or they may become loose causing the amplifier to shut down.

•Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

CAUTION:

To prevent malfunction and/or injury

•To ensure proper heat dissipation of the amplifier, be sure of the following during installation.

—Allow adequate space above the amplifier for proper ventilation.

—Do not cover the amplifier with a floor mat or carpet.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could

become hot to the touch and minor burns could result.

•Do not install the amplifier on unstable places such as the spare tire board.

•The best location for installation differs with the car model and installation location. Secure the amplifier at a sufficiently rigid location.

•Make temporary connections first and check that the amplifier and the system operate properly.

•After installing the amplifier, confirm that the spare tire, jack and tools can be easily removed.

11

Page 11 Page 13
Page 12
Image 12
Pioneer PRS-D410 owner manual Installation, To prevent malfunction and/or injury
Page 11 Page 13

PRS-D410 specifications

The Pioneer PRS-D410 is an advanced 4-channel car amplifier designed to enhance the audio experience by delivering high-quality sound and performance in an efficient and compact package. This versatile amplifier is ideal for audiophiles looking to upgrade their car sound system, providing power and clarity that elevates any in-car audio setup.

One of the main features of the PRS-D410 is its Class D amplification technology. Class D amplifiers are known for their high efficiency, generating less heat compared to traditional Class A/B amplifiers. This allows for a smaller and lighter amplifier without compromising on power output. The PRS-D410 delivers impressive maximum power ratings, making it suitable for driving multiple speakers or a combination of speakers and subwoofers with ease.

The amp offers four channels of output, each capable of producing 100 watts at 2 ohms, which translates to a total output of 400 watts. This robust power output ensures that the audio remains clear and detailed at all volume levels. The PRS-D410 also features adjustable low-pass and high-pass crossovers, allowing users to optimize their sound configuration based on their speaker setup. This flexibility enables audio enthusiasts to tailor the sound according to their preferences, whether they favor bass-heavy music or a more balanced sound profile.

Another remarkable characteristic of the PRS-D410 is its compact design. With a low-profile chassis, it can be easily installed in tight spaces, making it an excellent option for various vehicle types. Despite its compact size, the amplifier maintains a robust build quality, ensuring durability and long-lasting performance.

The PRS-D410 incorporates advanced protection circuitry to prevent overheating, short circuits, and overloading, which is crucial for maintaining the longevity of the device. Additionally, it features RCA inputs for easy connectivity with a wide range of audio sources, enhancing its versatility.

Overall, the Pioneer PRS-D410 is an exceptional choice for those seeking to amplify their car audio experience. Its powerful output, efficient Class D technology, customizable crossover settings, and compact design make it a standout option for both casual listeners and serious audiophiles alike.
Top Page Image Contents