Pioneer PRS-D410 owner manual Connecting the Speaker Output Terminals, Using the Speaker Input

Connecting the Speaker Output Terminals

1.Expose the end of the speaker wires using nippers or a cutter by about 10 mm and twist.

Twist

10 mm

2.Attach lugs to speaker wire ends. Lugs not supplied.

• Use pliers, etc., to crimp lugs to wires.

Lug

Speaker wire

3.Connect the speaker wires to the speaker output terminals.

•Fix the speaker wires securely with the termi- nal screws.

Terminal screw

Speaker

outputSpeaker wire terminal

Using the Speaker Input

Connect the car stereo speaker output wires to the amplifier using the supplied speaker input wire with RCA pin cord.

• Slide the input switch to the right.

•For four-channel input, connect two speaker input wires with RCA pin cord to RCA input jack A and B. Be sure to slide the input select switch to the right.

•For two-channel input, connect the speaker input wire with RCA pin cord to RCA input jack A. Do not connect anything to RCA input jack B. Be sure to slide the input select switch to the left.

7Connections when using the speaker input

Car stereo

Speaker output

White: Black:	Black: Red:
Left + Left ≠	Right ≠ Right +

Speaker input wire with RCA pin cord

To RCA input jack of this unit.

•As a result of connecting the car stereo speaker output wire to the amplifier, the power of the amplifier is turned on automatically when the car stereo is turned on. It is not necessary to connect the system remote control wire in this case.

Note:

•Connect the system remote control wire when the power of the amplifier is not to be turned on when the car stereo is turned on.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS êìëëäàâ

8