1.Push the master eject unit open button and open the master eject unit.
2.Remove the misfed paper.
lb.
3.When paper is com- pletely wrapped around the drum, pull out the drum unit until the drum hits the drum stopper, and remove the misfed paper from the drum.
4.Close the front cover and the master eject unit.
5.Prints which have an image on the leading edge tend to wrap around the drum easily. Shift the image toward to the trailing edge.
6 Press the Reset key.
7.Press the Print Start key. Use the Proof key if neces- sary.
If the paper is curled or the Original has narrow leading edge margin, the following action is necessary.
46
