Canon EOS DIGITAL REBEL XTI Error Codes, Image Review & Operation, The image cannot be erased

Error code

Troubleshooting Guide

Image Review & Operation

The image cannot be erased.

If the image has been erase-protected, it cannot be erased. (p.122)

The wrong shooting date and time is displayed.

The correct date and time has not been set. (p.37)

No image appears on the TV screen.

Make sure the video cable plug is connected all the way in. (p.121) Set the video OUT format (NTSC/PAL) to the same video format as the TV. (p.157)

Use the video cable that came with the camera. (p.121)

Error Codes

If a problem occurs with the camera, an error message is displayed. Follow the suggested solution to resolve the problem. To recover from the error screen, turn the power switch off and on, or remove and reinstall the battery.

If error 02 (CF card problem) is displayed,

Countermeasures remove and reinstall the CF card or format the card. This may resolve the

problem.

If the same error keeps occurring, there may be a problem. Write down the error code and consult your nearest Canon Service Center.

If an error code appears right after shooting, the picture might not have been captured. After the error is resolved, press the <x> button and check if the picture was captured.

163