Canon EOS DIGITAL REBEL XTI instruction manual White Balance Auto Bracketing, Bracketing Sequence

3White Balance CorrectionN

White Balance Auto Bracketing

With just one shot, three images having a different color tone can be recorded simultaneously. Based on the white balance mode’s standard color temperature, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing. White balance bracketing is possible up to ±3 levels in single-level increments.

Set the white balance bracketing amount.

In step 2 for white balance correction,
when you turn the <6> dial, the “ ”
mark on the screen will change to “	”

B/A bias ±3 levels	(3 points). Turning the <6> dial to the
	right sets the B/A bracketing, and turning
	it to the left sets the M/G bracketing.

XOn the right side of the screen, “BKT”

indicates the bracketing direction and the bracketing amount is also displayed. Press <0> to exit the setting and return to the menu.

To cancel the bracketing, set “BKT” to “±0” (“” to “” (1 point)).

Bracketing Sequence

Correct white balance, blue bias, and amber bias. Or, correct white balance, magenta bias, and green bias.

If the image-recording quality is set to RAW or RAW+73, white balance bracketing cannot be used.

With white balance bracketing set, the maximum burst will be fewer during continuous shooting. The number of possible shots will also decrease to about one-third the normal number.

Since three images are recorded for one shot, the CF card will take longer to record the shot.

“BKT” stands for Bracketing.

89