Schneider Electric 890USE17700 manual Saving Configuration Data, when you attempt to save it

Advanced Configuration Features

Saving Configuration Data

Introduction	The Advantys configuration software allows you to save configuration data created
	or modified with this software to the NIM’s Flash memory and/or to the removable
	memory card (See Physical Description, p. 50). Subsequently, this data can be read
	from Flash memory and used to configure your physical island.
	Note: If your configuration data is too large, you will receive a warning message
	when you attempt to save it.

How to Save a The following procedure describes the general steps to use to save a configuration

Configuration data file to either Flash memory directly or to a removable memory card. For more detailed procedural information, use the configuration software’s online help feature:

Step Action

1Connect the device running the Advantys configuration software to the CFG port (See The CFG Interface, p. 33) on the NIM, and launch the software.

2Download the configuration data that you want to save from the configuration software to the NIM. Then, use one of the following commands from the configuration software’s Online menu:

￿To save to the NIM’s Flash memory, use the store to Flash command.

To save to a removable memory card, first install the card (See Installing the Card, p. 51) in the host NIM, then use the store to removable memory card command.

890USE17700 April 2004 163