Schneider Electric 890USE17700 manual Configuring a Role Name, Server-Assigned IP Addresses, p

STB NIP 2212 Web Server

Configuring a Role Name

Use the following procedure to create or edit a role name for the STB NIP 2212:

Step	Action	Comment
1	Set the lower rotary switch to an
	INTERNAL position (See Physical
	Description, p. 28), and power cycle the
	STB NIP 2212.
2	Open the STB NIP 2212 web site.
3	Click on the Configuration tab to display
	the Configuration menu.
4	Select the Role Name option.
5	Type or overtype the numeric part of the	The default role name is
	role name with three numeric values. You	STBNIP2212_000.
	can use any numbers in the range
	00 to 159 that are not already in use on
	the same Ethernet LAN.
6	Click on the Save button to save your role	The role name will appear in the banner
	name to the Flash memory and in RAM.	at the top of each STB NIP 2212 web
		page.
		Note: Saving the role name, however,
		does not configure the STB NIP 2212
		with it. You must reboot the
		STB NIP 2212 (see step 8) to configure
		it with a role name and to have a
		DHCP server assign an IP address (See
		Server-Assigned IP Addresses, p. 62).
7	Click on the Configuration tab to return to
	the Configuration menu.
8	Select the Reboot option (See About the
	Reboot Option, p. 84).
9	At the Reboot now? prompt, click on the
	OK button.
10	Click on the OK button at the confirmation	Your STB NIP 2212 restarts. It is
	prompt, "Are you sure?"	configured with the role name and an
		IP address.

890USE17700 April 2004 83