Schneider Electric 890USE17700 manual STB NIP 2212 Configurable Parameters

Advanced Configuration Features

STB NIP 2212 Configurable Parameters

Introduction	The following information describes how to the configure parameters for the
	STB NIP 2212 using the Advantys configuration software.
	The following operating parameters are user configurable:
	data size (in words) of PLC output data transmitted to the HMI panel and HMI
	￿input data sent to the PLC
	maximum node ID for the last module assembled on the island bus, including
	CANopen devices
General	For general information about the NIM module (model name, version number,
Information	vendor code, etc.), do the following:
	Step	Action	Comment
	1	Open your island configuration with the	The STB NIP 2212 is the leftmost module
		Advantys configuration software.	in your island bus assembly.
	2	Double-click on the NIM in the island	The module editor window appears.
		editor.
	3	Select the General tab.	General information about the
			STB NIP 2212 is available from this tab.

Accessing

Configurable

Parameters

To access the configurable parameters for the STB NIP 2212:

Step	Action	Comment
1	Double-click on the STB NIP 2212 in	The module editor window appears.
	the island editor.
2	Select the Parameters tab.	Configurable parameters are located
		under this tab.
3	In the Parameter name column,	The configurable parameters are
	expand the Additional Info Store List by	displayed.
	clicking on the plus (+) sign.

150 890USE17700 April 2004