Glossary

industrial I/O

An Advantys STB I/O module designed at a moderate cost for typical continuous,

 

high-duty-cycle applications. Modules of this type often feature standard IEC

 

threshold ratings, usually providing user-configurable parameter options, on-board

 

protection, good resolution, and field wiring options. They are designed to operate

 

in moderate-to-high temperature ranges.

input filtering

The amount of time that a sensor must hold its signal on or off before the input

 

module detects the change of state.

input polarity

An input channel’s polarity determines when the input module sends a 1 and when

 

it sends a 0 to the master controller. If the polarity is normal, an input channel will

 

send a 1 to the controller when its field sensor turns on. If the polarity is reverse, an

 

input channel will send a 0 to the controller when its field sensor turns on.

input response

The time it takes for an input channel to receive a signal from the field sensor and

time

put it on the island bus.

INTERBUS

The INTERBUS fieldbus protocol observes a master/slave network model with an

protocol

active ring topology, having all devices integrated in a closed transmission path.

IP

internet protocol. That part of the TCP/IP protocol family that tracks the internet

 

addresses of nodes, routes outgoing messages, and recognizes incoming

 

messages.

 

 

L

LAN

local area network. A short-distance data communications network.

light industrial

An Advantys STB I/O module designed at a low cost for less rigorous (e.g.,

I/O

intermittent, low-duty-cycle) operating environments. Modules of this type operate in

 

lower temperature ranges with lower qualification and agency requirements and

 

limited on-board protection; they usually have limited or no user-configuration

 

options.

linearity

A measure of how closely a characteristic follows a straight-line function.

LSB

least significant bit, least significant byte. The part of a number, address, or field that

 

is written as the rightmost single value in conventional hexadecimal or binary

 

notation.

 

 

180

890USE17700 April 2004

Page 180
Image 180
Schneider Electric 890USE17700 manual Interbus

890USE17700 specifications

Schneider Electric has long been recognized as a leader in energy management and automation solutions, and one of its innovative offerings is the Schneider Electric 890USE17700. This product is part of the company's comprehensive portfolio aimed at enhancing energy efficiency and operational performance across various sectors.

The 890USE17700 is primarily designed for use in industrial applications, serving as an advanced device that can significantly contribute to smarter energy usage. One of its main features is its ability to optimize energy consumption through intelligent control systems. This is achieved through real-time monitoring and analysis, allowing users to identify inefficiencies and implement corrective actions swiftly.

Equipped with state-of-the-art technology, the 890USE17700 incorporates Schneider Electric's EcoStruxureâ„¢ platform, which leverages the Industrial Internet of Things (IIoT) principles. This platform allows for seamless connectivity of devices and systems, enabling users to collect valuable data that can drive decision-making processes. Moreover, the real-time analytics provided by this technology ensure that organizations can respond promptly to changing operational conditions.

Safety and reliability are other key characteristics of the 890USE17700. The device is built with robust safety features that comply with international standards, ensuring protection against electrical faults and other potential hazards. This not only enhances the operational reliability of industrial systems but also supports compliance with regulatory requirements.

The 890USE17700 also offers flexibility in deployment, allowing it to integrate with existing systems and infrastructure without significant modifications. Its user-friendly interface simplifies setup and programming, making it accessible for various levels of technical expertise. This ease of use encourages widespread adoption across diverse industrial environments.

In summary, the Schneider Electric 890USE17700 stands out as a premier solution for organizations aiming to enhance their energy efficiency and operational performance. Its integration with the EcoStruxure platform, focus on safety, and flexibility make it a compelling choice for modern industrial applications. As industries continue to evolve towards smarter and more sustainable practices, the 890USE17700 is poised to play a crucial role in this transformation.