Sierra Wireless 595U Menu Item Description, Welcome, Screens, When ready, Enable, Network, Mode

The following table describes the options:

Menu Item	Description
Always show	Display a welcome screen upon a successful connection to the
Welcome	network.
Screens
GO	Automatically connect to the network after Sprint Connection
automatically	Manager starts, or whenever Sprint Connection Manager
when ready	loses the network connection.
	To select GO automatically when ready, ensure that Enable
	Network Adapter (NDIS) (below) is not selected.
	Tip: You can also set Sprint Connection Manager to start
	automatically (see “Launch when Windows starts” on page 67).
	These settings provide an “always-on” connection, as long as you
	have network coverage.
	You can have a connection established automatically, without
	having to run Sprint Connection Manager. Ensure that
	GO automatically when ready is not selected, and select Enable
	Network Adapter (NDIS) (below).
Enable	Make a connection automatically, without running
Network	Sprint Connection Manager—simply by starting whatever
Adapter	application you want to use (such as your Web browser or
(NDIS)	email application).
	To select Enable Network Adapter (NDIS), ensure that GO
	automatically when ready (above) is not selected.
	Note: Sprint Location Services are available only when
	Sprint Connection Manager is running.
Network	Attempt a Sprint Power Vision (1xEV-DO) connection and, if
Mode:	not successful, attempt the slower Sprint Vision (1X)
Automatic	connection.
Network	Attempt only a Sprint Power Vision (1xEV-DO) connection.
Mode:	Note: Sprint Location Services may not be supported. When in an
1xEV-DO	area that has only Sprint Vision (1X) coverage, you won’t be able to
Only	connect to the network.

Section 3C: Changing Sprint Connection Manager Settings 69