70 Section 3C: Changing Sprint Connection Manager Settings
Network
Mode:
1XOnly
Attempt only a SprintVision (1X) connection (even when you
have SprintPower Vision [1xEV-DO] coverage, which provides
faster data transmission speeds).
Note: When in an area that has only SprintPower Vision (1xEV-DO)
coverage, you won’t be able to connect to the network.
Roam Mode:
Sprint
Disable roaming when you are not in the network coverage
area. You will be able to connect only when you are in the
network coverage area.
Roam Mode:
Automatic
Allow roaming when you are not in the network coverage
area.
Note: Roaming rates may apply. Roam Guard (page51) can remind
you of this.
Roam Mode:
Roam Only
Allow only roaming.
Note: Roaming rates may apply. Roam Guard (page51) can remind
you of this. SprintLocation Services may not be available.
Roam Mode:
Roam Guard
Display a warning message when you are about to establish a
data connection while roaming. For more information, see
“Roam Guard” on page51.
Available only if RoamMode is set to Automatic (page 70).
Note: If you proceed with the data connection, roaming rates may
apply.
Activation
Wizard
Used only when activating a USB modem, or when changing
your USB modem’s phone number (page25).
User Lock
Change
Change the security lock code of the USB modem (page58).
Auto Launch Optionally specify which application to automatically launch
when a connection is established.
See “Auto-launch upon Network Connection” on page52.
Menu Item Description