Advantech RS-485 user manual Example command $35S3C0A3110cr, Data format of 8-bit parameters

Command Set	5024 Analog Output
$aaSiCjArrff	$aaSiCjArrff

?delimiter character indicating the command was invalid.

aa(range 00-FF) represents the 2-character hexadecimal address of an ADAM-5000 system.

(cr) is the terminating character, carriage return (0Dh)

Example command: $35S3C0A3110(cr)

response: !35(cr)

The analog output channel 0 in slot 3 of the ADAM- 5000 system at address 35h is configured to an output range 4 to 20mA, engineering units data format, and a slew rate of 1.0mA/sec.

The response indicates that the command has been received.

Note: An analog output module requires a maximum of 20 milliseconds to perform auto calibration and ranging after it is reconfigured. During this time span, the module cannot be address to perform any other actions.

Figure 6-4 Data format of 8-bit parameters

6-92 ADAM-5000