Command Set | 5013 RTD Input | |
|
|
|
$aaSi0 |
| $aaSi0 |
Name | RTD Span Calibration |
|
Description | Calibrates a specified RTD input module of a specified | |
| system to correct for gain errors. | |
Syntax | $aaSi0(cr) |
|
| $ is a delimiter character. |
|
| aa (range | |
| address of the | |
| RTD module. |
|
| Si identifies the slot i (i:0 to 3) containing the RTD | |
| module to be calibrated. |
|
| 0 represents the span calibration command. | |
| (cr) is the terminating character, carriage return (0Dh). | |
Response. | !aa(cr) if the command is valid. | |
| ?aa(cr) if an invalid operation was entered. | |
There is no response if the module detects a syntax error or communication error or if the specified address does not exist.
> delimiter character indicating a valid command was received.
? delimiter character indicating the command was invalid.
aa (range
(cr) is the terminating character, carriage return (0Dh).