Chapter 5

: Send a single command or batch command repeatedly.

: Stop issuing commands.

: Save history of the terminal emulation to txt file.

On PC#3, you can observe all commands issued from PC#1. Mean- while, you can also observe all responses received at PC#2.

Address of selected modules

Figure 5-10 Monitor the issuing commands from PC#1

When your system is connected with multiple ADAM-4000 or ADAM-5000 modules, just click the addresses of the modules to see relevant information (multiple selection from 00 to FF is allowed). Then check the Filter option and click Update button to see relevant information of the modules. Note that the information about other unselected modules won’t show forth.

5.4.7Saving a Module’s Configuration to File

Save the input range, baud rate, data format, checksum status and/ or integration time and Alarm Status for a specified analog input module.

ADAM-5000

5-17

Page 109
Image 109
Advantech RS-485 user manual Saving a Module’s Configuration to File, Monitor the issuing commands from PC#1