Advantech RS-485 user manual Syntax $aaSiCjAhCSkCncr

	5013/5017/5017H/5018
Command Set	Analog Input Alarm
$aaSiCjAhCSkCn	$aaSiCjAhCSkCn

Name	Set Alarm Connection
Description	Connects the High/Low alarm of the specified input
	channel to the specified digital output in the addressed
	ADAM-5000 system
Syntax	$aaSiCjAhCSkCn(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i (i : 0 to 3) and the
	desired analog input channel j (j : 0 to 7).
	AhC is the Set Alarm Connection command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	SkCn identifies the desired slot k (k : 0 to 3) and the
	desired digital output point n (n : 0 to F). To disconnect
	the digital output, k and n should be set as ‘*’.
	(cr) represents terminating character, carriage return
	(0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.
	! delimiter character indicating a valid command was
	received.
	aa represents the 2-character hexadecimal address of the
	corresponding ADAM-5000 system.
	(cr) represents terminating character, carriage return
	(0Dh)

6-80 ADAM-5000