Advantech RS-485 user manual Set Alarm Disable/Latch

		Chapter 6
$aaSiCjAhEs		$aaSiCjAhEs
Name	Set Alarm Disable/Latch
Description	The addressed counter module is instructed to set alarm
	disable or latch.
Syntax	$aaSiCjAhEs(cr)
	$ is a delimiter character.
	aa (range 00-FF) represents the 2-character hexadecimal
	address of an ADAM-5000 system.
	SiCj identifies the desired slot i and the desired channel j.
	AhEs is the command for setting Alarm Disable/Latch
	Mode command.
	h indicates alarm type and can have the value H = High
	alarm, L = Low alarm
	s indicates alarm enable/disable and can have the value
	D = Disable, E=Enable
	(cr) represents terminating character, carriage return (0Dh)
Response	!aa(cr) if the command was valid
	There is no response if the system detects a syntax error
	or communication error or if the specified address does
	not exist.

! delimiter character indicating a valid command was received.

aa represents the 2-character hexadecimal address of the corresponding ADAM-5000 system.

(cr) represents terminating character, carriage return (0Dh)

ADAM-5000 6-147