To remove belt cover

 

B

1.

Remove the two (2) screws (A) securing belt cover (B) to frame (C).

 

2.

Remove belt cover.

 

 

 

 

Replace belt cover by installing cover and screws and tighten se-

 

 

 

curely.

 

 

Entfernen der riemenabdeckung

 

 

1.

Entfernen Sie die zwei (2) Schrauben (A), mit denen die Riemena-

 

 

 

beckung (B) am Rahmen (C) befestigt ist.

 

 

2.

Entfernen Sie die Riemenabdeckung.

 

 

Befestigen Sie die Riemenabdeckung erneut, indem Sie die Abdeck-

C

 

A

ung und die Schrauben wieder anbringen und die Schrauben fest

 

anziehen.

Pour enlever le couvercle de la courroie

Het verwijderen van de riemhuls

1.

Enlevez les deux (2) vis (A) en fixant le couvercle de la

1.

Verwijder de twee (2) schroeven (A) die de riemhuls (B)

 

courroie (B) au châssis (C).

 

aan het frame (C) bevestigen.

2.

Enlevez le couvercle de la courroie.

2.

Verwijder de riemhuls.

Remplacez le couvercle de la courroie en installant le

Zet de riemhuls weer terug door de huls en de schroeven

 

couvercle et serrez solidement.

 

terug te plaatsen en draai stevig aan.

Desmontar el cubre correas

1.Desmontar los dos (2) tornillos (A) que sujetan el cubre correas (B) a la carcasa (C).

2.Desmontar el cubre correas.

Sustituir el cubre correas colocando la cubierta y los tornillos y apretando firmemente.

Rimuovere il coperchio della cinghia

1.Togliere le due (2) viti (A) che fissano il coperchio della cinghia (B) all’intelaiatura (C).

2.Togliere il coperchio della cinghia.

Rimettere coperchio e viti, stringendo bene.

2

 

1

 

3

 

 

L K A

 

J

D C B

H

 

 

 

 

M

 

 

E

 

 

F

 

 

G

 

2

1

 

To replace belts

The auger and traction drive belts are not adjustable. If the belts are dam- aged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

NOTE: It is recommended that both the auger and traction drive belt be replaced at the same time.

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to the snow thrower.

WARNING: Belt replacement requires separation of the snow thrower. While separating the auger housing (1) from the frame assembly (2), it is important that an assistant stand in the oper- ating position and hold the snow thrower handles (3). Serious personal injury and/or damage to the unit could occur if the snow thrower should fall during the belt changing process.

1.REMOVE GASOLINE FROM FUEL TANK - Drain gasoline from fuel tank into a suitable container, outdoors, away from fire or flame. Wipe up any spilled gasoline.

2.REMOVE DISCHARGE CHUTE - Loosen lock nut securing chute rota- tor head to mounting bracket only enough to allow chute rotator head to be raised and discharge chute to be removed from snow thrower.

3.REMOVE BELT COVER - See “TO REMOVE BELT COVER” in this section of this manual.

4.REMOVE ENGINE PULLEY (A) - Remove bolt (B), lock washer (C) and flat washer (D) securing pulley to engine crankshaft. Remove outside (auger) pulley (A) only from crankshaft.

5.SEPARATE SNOW THROWER - With your assistant standing in the operating position holding the handles, remove the two bolts (F) and lock washers (G) holding auger housing (1) and frame (2) together.

WARNING: As the last bolt is removed, have your assistant care- fully lower the handles down to the ground.

6.REMOVE AUGER BELT (H) from around pulley (E).

7.RELIEVE TENSION ON TRACTION DRIVE BELT IDLER (J) and remove traction drive belt (K) from around pulleys.

HINT: Insert a 3/8" drive ratchet (in the “ON” position) into the square hole in idler arm (J) and rotate ratchet clockwise to relieve tension.

47

Page 47
Image 47
Husqvarna 8024STE To remove belt cover, Entfernen der riemenabdeckung, Desmontar el cubre correas, To replace belts

8024STE specifications

The Husqvarna 8024STE is a standout snowblower that seamlessly blends power, efficiency, and user-friendly design, making it an excellent choice for homeowners and professionals alike. This robust machine is engineered to tackle heavy snowfall, providing a reliable solution in the coldest of winters.

At the heart of the Husqvarna 8024STE is a powerful 24-inch clearing width, allowing it to efficiently clear large areas in minimal time. With an impressive throwing distance of up to 50 feet, this snowblower ensures that snow is not only cleared but also thrown far enough to keep walkways and driveways clear of drifting snow.

One of the key features of the 8024STE is its innovative Husqvarna SnowKing engine. This engine is designed for performance, featuring high torque and an easy-start mechanism that allows users to get started without difficulty. It operates smoothly even in extreme conditions, ensuring that you can count on it when the weather turns harsh.

The snowblower's heavy-duty construction is designed to withstand demanding tasks. The auger and impeller are constructed from durable materials, providing enhanced durability and performance. The auger's design allows for efficient snow gathering and movement, while the high-capacity impeller ensures that snow is discharged effectively.

The 8024STE also boasts a range of user-friendly features, including a convenient electric start option. This allows for effortless starting in cold temperatures. The machine is equipped with large, rugged tires that provide excellent traction, allowing it to navigate through deep snow and icy conditions with ease.

Another noteworthy characteristic is its adjustable skid shoes, which allow for customizable height adjustments to suit different surfaces, whether you're clearing gravel or asphalt. The industrial-grade metal chute and deflector enable precise control over where you want the snow to go, further enhancing its usability.

In terms of ergonomics, the Husqvarna 8024STE features a comfortable control panel and heated hand grips, which make it easier to operate in frigid temperatures. The steering is designed for easy maneuverability, allowing operators to turn and navigate tight spaces efficiently.

With its combination of power, advanced features, and careful engineering, the Husqvarna 8024STE is designed to deliver reliable snow removal performance, helping to make winter maintenance more manageable for users. Whether for residential driveways or commercial lots, this snowblower stands out as a robust solution to winter's challenges.