MT2834ZPX Owner's Manual
COMMAND: | &Cn |
VALUES: | n = 0, 1, 2 or 4 |
DEFAULT: | &C1 |
DESCRIPTION: |
|
| &C0 forces Carrier Detect on. |
| &C1 lets Carrier Detect act normally. |
| &C2 lets Carrier Detect drop S24 time on disconnect. |
| &C4 resets modem when Carrier Detect drops. |
COMMAND: | &CDn |
VALUES: | n = 0 or 1 |
DEFAULT: | &CD0 |
DESCRIPTION: |
|
| &CD0 execute cleardown on disconnect. |
| &CD1 do not execute cleardown on disconnect. |
COMMAND: | Ds |
VALUES: | s = phone # |
DEFAULT: | n/a |
DESCRIPTION: |
|
| Dial a telephone number “s” , where s may |
| include up to 60 digits or T, P, R, comma and ; characters. |
COMMAND: | DsNd |
VALUES: | s = phone # and d = 0 thru 9 |
DEFAULT: | n/a |
DESCRIPTION: |
|
| Store telephone number. To store, phone number ”s“ is en |
| entered and followed by N and then Directory Number “d.” |
COMMAND: | &Dn |
VALUES: | n = 0 thru 3 |
DEFAULT: | &D2 |
DESCRIPTION: |
|
| &D0 means DTR is ignored |
| &D1means modem returns to command mode. |
| &D2 lets modem react to DTR normally. |
| &D3 causes modem to reset to modem default parameters. |
COMMAND: | $Dn |
VALUES: | n = 0 or 1 |
DEFAULT: | $D0 |
DESCRIPTION: |
|
| $D0 disables DTR Dialing. |
| $D1 enables DTR Dialing. |
26
