Multi-Tech Systems MT2834ZPX - page 32

32
MT2834ZPX Owner's Manual
COMMAND: &P n
VALUES: n = 0 or 1
DEFAULT: &P1
DESCRIPTION:
&P0 selects 60-40 pulse ratio.
&P1 selects 67-33 pulse ratio.
COMMAND: Q n
VALUES: n = 0, 1 or 2
DEFAULT: Q0
DESCRIPTION:
Q0 means Result Codes sent.
Q1 means Result Codes will be suppressed (quiet).
Q2 means Dumb Answer Mode.
COMMAND: &Q n
VALUES: n = 0 or 1
DEFAULT: &Q0
DESCRIPTION:
&Q0 selects Multi-Tech command set.
&Q1 selects AT command set.
COMMAND: R n
VALUES: n = 0 or 1
DEFAULT: R0
DESCRIPTION:
R0 selects modem will not reverse modes.
R1 selects modem will reverse modes.
COMMAND: &R n
VALUES: n = 0, 1 or 2
DEFAULT: &R1
DESCRIPTION:
&R0 lets Clear to Send act normally.
&R1 forces Clear to Send on in Command Mode.
&R2 drops for 1 second on disconnect.
COMMAND: $Rn
VALUES: n = 0 or 1
DEFAULT: $R0
DESCRIPTION:
$R0 selects disconnect after 12 retransmits.
$R1 selects do not disconnect after 12 retransmits.