MT2834ZPX Owner's Manual
COMMAND: | Xn |
VALUES: | n = 0, 1, 2, 3 or 4 |
DEFAULT: | X0 |
DESCRIPTION: |
|
| X0 selects Basic Result Codes (w/o CONNECT 1200, |
| CONNECT 2400). |
| X1 selects Extended Result Codes (w/CONNECT 1200, |
| CONNECT 2400). |
| X2 selects Standard AT Command set with NO DIAL |
| TONE. |
| X3 selects Standard AT Command set with BUSY. |
| X4 selects Standard AT Command set with NO DIAL |
| TONE and BUSY. |
COMMAND: | #Xn |
VALUES: | n = 0 or 1 |
DEFAULT: | #X0 |
DESCRIPTION: |
|
| #X0 selects single XOFF character sent until XON level |
| returns. |
| #X1 selects multiple XOFF characters after buffer level is |
| full. |
COMMAND: | Yn |
VALUES: | n = 0 or 1 |
DEFAULT: | Y0 |
DESCRIPTION: |
|
| Y0 disables sending or responding to long space “break”. |
| Y1 enables sending or responding to long space “breaks”. |
COMMAND: | Z |
VALUES: | n/a |
DEFAULT: | n/a |
DESCRIPTION: |
|
| All configuration parameters are reset to default values. |
COMMAND: | , (Comma) |
VALUES: | n/a |
DEFAULT: | n/a |
DESCRIPTION: |
|
| Causes pause during dialing. |
36
