ZyXEL Communications MSAP2000 Delete port, Mac mac Pktfilter, Pppoeiparpn, Etbiosdhcpeap, Control

MSAP2000 AAMS User’s Guide

Table 58 Commands (continued)

COMMAND				DESCRIPTION
			delete <port>	Removes a MAC filter MAC entry.
			<mac> [<mac>
			<mac> ...]
	pktfilter			See Section 28.13 on page 242 for
				how to configure packet filters.
		show	[portlist]	Displays packet type filter settings.
		set	<portlist>	Sets the packet type filter for a
			[pppoeiparpn	specific port.
			etbiosdhcpeap	none accepts all packets. This
			oligmpnone]	command disables the pktfilter
				pppoeonly <portlist> command.
		pppoeonly	<portlist>	Uses this command to allow only
				PPPoE traffic. It drops any non- PPPoE
				packets.
				This command disables the
				pktfilter set <portlist>
				[pppoeiparpnetbiosdhc
				peapoligmpnone]command.
	dot1x
		show	[portlist]	Displays IEEE 802.1X settings.
		enable		Turns on IEEE 802.1X.
		disable		Turns off IEEE 802.1X.
		auth	<profileradius	Sets IEEE 802.1X to use the local
			>	profiles or an external RADIUS
				server for authentication.
		port
			enable	Turns on IEEE 802.1X for
			<portlist>	specific ports.
			disable	Turns off IEEE 802.1X for
			<portlist>	specific ports.
			control	Sets the IEEE 802.1X port
			<portlist>	authentication option for specific
			<autoauthunau th>	ports.
			reauth	Sets the IEEE 802.1X re-
			<portlist>	authentication option for specific
			<onoff>	ports.
			period	Sets the IEEE 802.1X re-
			<portlist>	authentication period for specific
			<period>	ports.
		radius
			show	Displays the external RADIUS server
				settings.
			ip <ip>	Sets the external RADIUS server IP
				address.

150