ZyXEL Communications MSAP2000 manual Ethernet Port Statistics, Enet

MSAP2000 AAMS User’s Guide

The following table describes the labels in this screen.

Table 6 Home

LABEL	DESCRIPTION
System up Time	This field shows how long the system has been running since the last time it
	was started.
The following fields are related to the Ethernet ports.
ENET	This field displays the number of the Ethernet port. Click a port number to
	display that port’s statistics screen (refer to 9.2.1).
Port Name	This field displays the name of the Ethernet port.
Media	This field displays the speed and the type of media that this Ethernet port is
	using for a connection (100copper or 10copper). “-” displays when the port is
	disabled or not connected.
Duplex	This field displays whether the port is using half or full-duplex communication. “-“
	displays when the port is disabled or not connected.
Up Time	This field shows the total amount of time in hours, minutes and seconds the
	port’s connection has been up. “--:--:--“ displays when the port is disabled or
	not connected.
The following fields are related to the ADSL ports.
xDSL	This identifies the ADSL port. Click a port number to display the ADSL Port
	Statistics screen (refer to Section 6.2.2 on page 67).
Status	This field shows whether the port is connected (Up) or not (Down).
Mode	This field shows which ADSL operational mode the port is set to use. “-
	“ displays when the port is not connected.
Up/Down stream	This field shows the number of kilobytes per second that a port is set to
	transmit and receive.
Interleave/Fast	This field shows the port’s ADSL latency mode (fast or interleave).
Up Time	This field shows the total amount of time in hours, minutes and seconds the
	port’s connection has been up. “-“ displays when the port is not connected.
The following fields and buttons apply to the whole screen.
Poll Interval(s)	The text box displays how often (in seconds) this screen refreshes. You
	may change the refresh interval by typing a new number in the text box
	and then clicking Set Interval.
Stop	Click Stop to halt system statistic polling.
Clear Counter	Select a port from the Port drop-down list box and then click Clear
	Counter to erase the recorded statistical information for that port.

5.2.1 Ethernet Port Statistics

In the Home screen, click an Ethernet port's number to display that port's statistics screen as shown next.

42