ZyXEL Communications MSAP2000 manual Commands Summary

MSAP2000 AAMS User’s Guide

24.2 Commands Summary

The following table lists commands that you can use with the MSAP2000 AAMS.

Table 58 Commands

COMMAND DESCRIPTION

sys
info
	show		Displays general system information.
	hostname	<hostname>	Sets the system name.
	location	<location>	Sets location information.
	contact	<contact>	Sets contact person information.
passwd			Sets the system’s administrator
			password.
reboot	[showseccan cel]		Sets the reboot timer or displays the
			timer and remaining time for reboot.
			If a reboot has been scheduled, use
			cancel to prevent a reboot.
snmp
	show		Displays SNMP settings.
	getcommunity	<community>	Sets the SNMP
			GetRequest community.
	setcommunity	<community>	Sets the SNMP
	trapcommunity	<community>	SetRequest community.
			Sets the SNMP Trap community.
	trustedhost	<ip>	Sets the SNMP trusted host. Set
			0.0.0.0 to trust all hosts.
	trapdst	<ip> [<port>]	Sets the SNMP trap server and
			listening port. Set 0.0.0.0 to not
			send any SNMP traps.
server
	show		Displays the device’s service
			status and port numbers.
	enable	<telnetftpweb	Turns on a service.
		icmp>
	disable	<telnetftpweb	Turns off a service.
		icmp>
	port	<telnetftpweb	Sets a port for a service.
		> <port>
client
	show		Displays the device’s secured client
			settings.
	enable	<index>	Allows a secured client set to
			manage the device.

141