ZyXEL Communications MSAP2000 Sys Command Examples, Info Show Command, Syntax, Set Msec0disable

MSAP2000 AAMS User’s Guide

Table 59 Sys Commands (continued)

COMMAND				DESCRIPTION
		sync		Retrieves the date and time from
				the time server.
	log
		show		Displays the device’s logs.
		clear		Clears the device’s logs.
	wdog
		show		Displays the current watchdog
				firmware protection feature status
				and timer.
		set	<msec0:disable>	Sets the watchdog count. 0 turns the
				watchdog off.
	monitor
		show		Displays the hardware monitor’s
				statistics.
		enable		Turns the hardware monitor on.
		disable		Turns the hardware monitor off.
		vlimit	<idx> <high>	Sets the maximum (<high>) or
			<low>	minimum (<low>) voltage at the
				specified voltage sensor. You can
				specify a voltage with up to three
				digits after a decimal point (0.941 for
				example).
				Normal voltage at each sensor: Idx:
				1=1.0v, 2=1.8v, 3=3.3v, 4=2.4v
		tlimit	<idx> <high>	Sets the maximum (<high>) or
				minimum (<low>) temperature at
			<low>	the specified temperature sensor.
				You can specify a temperature with
				up to three digits after a decimal
				point (-50.025 for example).
				Temperature sensor locations: Idx:
				1=DSL Line Driver, 2=DSL Chipset,
				3=CPU
	showall	[nopause]		Displays all system-
				related configuration.

25.2 Sys Command Examples

These are the commonly used commands that belong to the sys (system) group of commands.

25.2.1Info Show Command

Syntax:

ras> sys info show

156