ZyXEL Communications manual MSAP2000 Aams User’s Guide Web Configurator Screens, Vlan

MSAP2000 AAMS User’s Guide

Table 4 Web Configurator Screens (continued)

LINK	DESCRIPTION
Switch Setup	Use this screen to set up global switch parameters such as IGMP
	snooping, MAC address learning, GARP and priority queues.
IP Setup	Use this screen to configure the system and management IP
	addresses and subnet masks.
ENET Port Setup	Use this screen to configure settings for the Ethernet ports
xDSL Port Setup	Use this screen to go to screens for configuring settings for individual
	DSL ports.
xDSL Profiles	Use this screen to go to screens for configuring profiles for the DSL
Setup	ports.
xDSL Line Data	Use this screen to go to screens for viewing DSL line operating values,
	bit allocation and performance counters.
Advanced Application
VLAN	Use this screen to go to screens for viewing and configuring the VLAN
	settings.
IGMP Snooping	Use this screen to configure IGMP snooping and display the results.
Static Multicast	Use this screen to configure static multicast filter entries.
Filtering	Use this screen to configure packet filtering.
MAC Filter	Use this screen to configure MAC filtering for each port.
Spanning Tree	Use this screen to go to screens for displaying Rapid Spanning Tree
Protocol	Protocol (RSTP) information and configuring RSTP settings.
Port	Use this screen to go to screens for configuring RADIUS and IEEE
Authentication	802.1x security settings.
Port Security	Use this screen to limit the number of MAC address that can be learned
	on a port.
DHCP Relay	Use this screen to configure the DHCP relay settings
Syslog	Use this screen to configure the syslog settings.
Access Control	Use this screen to configure the system login password and configure
	SNMP and remote management.
Routing Protocol
Static Routing	Use this screen to configure static routes. A static route defines how the
	MSAP2000 AAMS should forward traffic by configuring the TCP/IP
	parameters manually.
Management
Maintenance	Use this screen to perform firmware and configuration file maintenance
	as well as restart the system.
Diagnostic	Use this screen to view system logs and test port(s).
MAC Table	Use this screen to view the MAC addresses (and types) of devices
	attached to what ports and VLAN IDs.
ARP Table	Use this screen to view the MAC address to IP address resolution table.
Config Save
Config Save	Use this screen to save the device’s configuration into the nonvolatile
	memory (the MSAP2000 AAMS’s storage that remains even if the
	MSAP2000 AAMS’s power is turned off).

32