ZyXEL Communications MSAP2000 manual Log Messages

MSAP2000 AAMS User’s Guide

21.2.1Log Messages

The following table lists and describes the system log messages.

Table 54 Log Messages

LOG MESSAGE	TYPE	DESCRIPTION
ADSL <port> Link	INFO	An ADSL port established a connection.
Up(SN=<seq no>):		<port>	- port number
<ds rate>/<us		<seq no>	- sequence number of the connection
rate>!
		<ds rate> - downstream rate
or
		<us rate> - upstream rate
ADSL Link Info:
		<us NM>	- upstream noise margin
NM:<ds NM>/<us
		<ds NM>	- downstream noise margin
NM>!
ADSL <port> Link	WARN	An ADSL port lost its connection.
Down(SN=<seq no>)!		<port>	- port number
Session Begin!	INFO	A console, telnet or FTP session has begun (see the
		<process> field for the type of session).
Session End!	INFO	A console telnet or FTP session has terminated (see the
		<process> field for the type of session).
Incorrect	WARN	Someone attempted to use the wrong password to start a
Password!		console, telnet or FTP session (see the <process> field for
		the type of session).
Received Firmware	WARN	A checksum error was detected during an attempted FTP
Checksum Error!	firmware	upload.
Received Firmware	WARN	The file size was too large with an attempted FTP
Size too large!		firmware upload.
Received Firmware	WARN	Someone attempted to upload a firmware file with a
Invalid!		wrong identity via FTP.
Received File	INFO	A file was uploaded to the MSAP2000 AAMS by FTP.
<file>!
		<file> - received file’s name.
THERMO OVER	WARN	The temperature was too high at one of the temperature
TEMPERATURE:		sensors.
dev:<id>		<id> - 0: sensor near the ADSL chipset
threshold:<thresho		- 1: sensor near the CPU
ld>(degree C)		- 2: thermal sensor chip itself
value:<temp>(degre e
		<threshold> - threshold temperature
C)!
		<temp>	- temperature when the entry was logged
THERMO OVER	INFO	The temperature at one of the temperature sensors has
TEMPERATURE		come back to normal.
released: dev:<id>		<id> - 0: sensor near the ADSL chipset
threshold:<thresho		- 1: sensor near the CPU
ld>(degree C)
		- 2: thermal sensor chip itself
value:<temp>(degre e
		<threshold> - threshold temperature
C)!
		<temp>	- temperature when the entry was logged

131