ZyXEL Communications MSAP2000 Log Clear Command, Monitor Show Command, Monitor Vlimit Command

MSAP2000 AAMS User’s Guide

Figure 87 Log Show Command Example

ras> sys log show
1 Wed Aug 11 20:37:11 2004 telnetd	INFO	Session Begin!
2 Wed Aug 11 20:37:05 2004 telnetd	INFO	Session Begin!
3 Wed Aug 11 20:36:56 2004 telnetd	INFO	Session Begin!

25.2.19Log Clear Command

Syntax:

ras> sys log clear

This command clears the system error log.

Note: If you clear a log (using the log clear command), you cannot view it again.

25.2.20 Monitor Show Command

Syntax:

ras> sys monitor show

This command displays the hardware monitor’s statistics.

An example is shown next.

Figure 88 Monitor Show Command Example

ras> sys monitor show

Hardware monitor status: enabled

		limit(hi) limit(lo)
		--------- --------- v1(v)
1.344	1.056 v2(v)		1.944
1.656 v3(v)		3.564	3.036
v4(v)		19.440	16.560
t1(c)		97.0	-55.0
t2(c)		97.0	-55.0
t3(c)		97.0	-55.0

25.2.21 Monitor Vlimit Command

Syntax:

ras> sys monitor vlimit <idx> <high> <low>

165