ZyXEL Communications MSAP2000 Aams User’s Guide Sys Commands, End ip, Telnetftp, 0100~1200

MSAP2000 AAMS User’s Guide

Table 59 Sys Commands (continued)

COMMAND DESCRIPTION

enable	<telnetftpweb	Turns on a service.
	icmp>
disable	<telnetftpweb	Turns off a service.
	icmp>
port	<telnetftpweb	Sets a port for a service.
	> <port>
client
show		Displays the device’s secured
		client settings.
enable	<index>	Allows a secured client set to
		manage the device.
disable	<index>	Stops a secured client set from
		managing the device.
set	<index> <start ip>	Sets a secured client set: a range of
	<end ip>	IP addresses from which you can
	[[telnet][ftp]	manage the device and the
	[web] [icmp]]	protocols that can be used.
syslog		The syslog feature sends logs
		to an external syslog server.
show		Displays the syslog settings. enable
		Turns on the syslog logging. disable
		Turns off the syslog logging. server
	<ip>	Sets the IP address of the syslog
		server.
facility	<facility>	Set the log facility (1~7) to log the
		syslog messages to different files in
		the syslog server. See your syslog
		program’s documentation for details.
time
show		Displays the system’s current time.
set	<hh> [<mm>	Sets the system’s time.
	[ss]]
date
show		Displays the system’s current date.
set	<yyyy mm dd>	Sets the system’s date.
timeserver
show		Displays the system’s time server.
set	<none>	Sets the system to not use a time
		server.
	<daytimetimen tp> Sets the time service protocol,
	<ip> <utc[<+-	time server’s IP address and the
	>0100~1200]>	device’s time zone.
	[nosync]

155