ZyXEL Communications MSAP2000 manual Log Format, Before using Get LDM Data

MSAP2000 AAMS User’s Guide

The following table describes the labels in this screen.

Table 52 Diagnostic

LABEL	DESCRIPTION
Syslog/ Event Log	Click Display to display a log of events in the multi-line text box. Click
	Clear to empty the text box and reset the syslog entry.
IP Ping	Type the IP address of a device that you want to ping in order to test a connection.
	In the field to the right specify the number of times that you want to ping the IP
	address. Click Ping to have the MSAP2000 AAMS ping the IP address (in the
	field to the left).
Loopback Test	Select a port number from the Port drop-down list box and enter a VPI/VCI to
	specify a PVC. Click OAM F5 Loopback to perform an OAMF5 loopback test on
	the specified DSL port. An Operational, Administration and Maintenance Function
	5 test is used to test the connection between two DSL devices. First, the DSL
	devices establish a virtual circuit. Then the local device sends an ATM F5 cell to
	be returned by the remote DSL device (both DSL devices must support ATM F5 in
	order to use this test). The results (“Passed” or “Failed”) display in the multi-line
	text box.
LDM Test	Select a port number from the Port drop-down list box and click Set LDM Port to
	have the MSAP2000 AAMS perform line diagnostics on the specified port. The
	ADSL port must be set to ADSL2 or ADSL2+ ADSL operational mode and have a
	connection. It takes about one minute for the line diagnostics to finish. The screen
	displays a message confirming upon which ADSL port line diagnostics will be
	performed. Click Get LDM Data to display the line diagnostics results after using
	the Set LDM Port button on an ADSL port. Use the line diagnostics results to
	analyze problems with the physical ADSL line.
	Note: Wait at least one minute after using Set LDM Port
	before using Get LDM Data.

21.2 Log Format

The common format of the system logs is: <item no> <time> <process> <type> <log

message>

Table 53 Log Format

LABEL	DESCRIPTION
<item no>	This is the index number of the log entry.
<time>	This is the time and date when the log was created.
<process>	This is the process that created the log.
<type>	This identifies what kind of log it is. "INFO" identifies an information log.
	"WARN" identifies a warning log.
<log message>	This is the log’s detailed information (see Table 54 on page 159).

130