ZyXEL Communications MSAP2000 manual Config Commands Summary, Config show Command Example

MSAP2000 AAMS User’s Guide

CHAPTER 30

Config Commands

	This chapter describes the config commands.
30.1	Config Commands Summary
	The following table lists the config commands you can use with the
	MSAP2000 AAMS.
Table 66	Config Commands
COMMAND				DESCRIPTION
config
		show	<sysswadsl	Displays the device’s configuration.
			ipstatall
			> [nopause]
		save		Saves the current configuration.
		restore		Reloads the factory default
				configuration.

30.2 Config show Command Example

Syntax:

ras> config show <sysswadslipstatall> [nopause]

This command shows the configuration of the specified category. nopause allows you to show all settings at one time so you do not need to press a key to continue.

An example is shown next.

235