ZyXEL Communications MSAP2000 manual Front Access Ports

2.1.1 Front Access Ports

The following wiring illustration describes how the POTS RJ45 port and LINE RJ45 port match to the wiring post of a MSAP2000 FXS at the MSAP2000 system backplane. MSAP2000 AAMS module provides up to 12 channels of ADSL+voice service.

Each POTS RJ45 connector supports four FXS subscriber line. Connect the wiring between FXS wiring post and the POTS connector so the voice traffic can be combined with the ADSL traffic in the AAMS built-in splitter. The combined signal will then come out from the LINE port. The combined signal will usually go to a MDF.

Two RJ45-male-to-open wire cables will be used for every four subscribers. Each AAMS will need six such cables. The length of the cable must be carefully measued between the FXS wiring post and AAMS front panel, as well as between AAMS front panel and the MDF.

1

2

3

4

5

6

7

8

POTS

FXS

1

2

3

4

5

6

7

8

LINE

25