ZyXEL Communications MSAP2000 manual Edit Configuration File, Editable Configuration File Upload

MSAP2000 AAMS User’s Guide

Quit FTP.

ftp> quit

31.3.2Edit Configuration File

Open the config-0file via notepad (see the following example) and edit to a desired configuration.

Note: Ensure that any changes you make to the commands in the configuration

file correspond to the commands documented in this User’s Guide.

Figure 150 Configuration File Example

#### sysinfo

sys info hostname ras

sys info location taiwan sys info contact zmlin

#### snmp

sys snmp getcommunity public sys snmp setcommunity public sys snmp trapcommunity 1234 sys snmp trustedhost 0.0.0.0

sys snmp trapdst 172.23.15.250

#### server

sys server enable telnet sys server enable ftp

sys server enable web sys server enable icmp

sys server port telnet 23 sys server port ftp 21 sys server port web 80

#### client

sys client set telnet 0.0.0.0 sys client set ftp 0.0.0.0 sys client set web 0.0.0.0 sys client set icmp 0.0.0.0

#### syslog

sys syslog enable

sys syslog server 172.23.15.240 sys syslog facility 1

#### timeserver

sys timeserver set time 172.23.15.240 utc+0800 nosync

#### watchdog

sys wdog set 10000

31.3.3Editable Configuration File Upload

You can upload the configuration file by following the steps below.

Use an FTP client to connect to the MSAP2000 AAMS.

C:\> ftp <MSAP2000 AAMS IP address>

239