ZyXEL Communications manual Vlan Port Setting, MSAP2000 Aams User’s Guide Static Vlan Setting

MSAP2000 AAMS User’s Guide

Table 27	Static VLAN Setting (continued)
LABEL		DESCRIPTION
Delete		Select the check boxes of the rules that you want to remove in the Delete column
		and then click the Delete button.
		You cannot delete a VLAN if any PVIDs are set to use the VLAN or the VLAN is
		the CPU (management) VLAN. The DEFAULT VLAN cannot be deleted when a
		port’s PVID refers to it. The CPU VLAN also cannot be deleted.
Cancel		Click Cancel to clear the Delete check
boxes. Active		Select this check box to enable the VLAN.
		You cannot disable a VLAN if any PVIDs are set to use the VLAN or the VLAN is the
		CPU (management) VLAN.
Name		Enter a descriptive name for this VLAN group for identification purposes.
VLAN ID		Enter the VLAN ID for this static VLAN entry; the valid range is between 1 and
4094. Port		The port numbers identify the MSAP2000 AAMS’s ports.
Control		Select Normal for the port to dynamically join this VLAN group using GVRP.
		This is available for the Ethernet ports.
		Select Fixed for the port to be a permanent member of this VLAN group. Use the
		Select All button to include every port.
		Select Forbidden if you want to prohibit the port from joining this VLAN group.
		Use the Select All button to include every port.
		You cannot change a port from the fixed state to another state if the port’s PVID is
		set to this VLAN. The VLAN must have at least one port set to the fixed status if
		the VLAN is the CPU (management) VLAN.
Tagging		Select Tx Tagging if you want the port to tag all outgoing frames transmitted with
		this VLAN group ID. Use the All button to include every port. Use the None
		button to clear all of the ports’ check boxes.
Add		Click Add to save your settings. The VLAN then displays in the summary table at
		the top of the screen.
		Clicking Add saves your changes to the MSAP2000 AAMS’s volatile memory.
		The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
		use the Config Save link on the navigation panel to save your changes to the
		non-volatile memory when you are done configuring.
Cancel		Click Cancel to begin configuring the screen again.

8.6 VLAN Port Setting

Click Advanced and then VLAN in the navigation panel and then the VLAN Port

Setting

link to display the screen as shown next.

Use this screen to specify port VLAN IDs and to set whether or not Ethernet ports propagate

VLAN information to other switches.

89