ZyXEL Communications MSAP2000 manual Vlan Port Show Command

MSAP2000 AAMS User’s Guide

where
<leaveall msec>	= This sets the duration of the Leave All Period timer for
	GVRP in milliseconds. Each port has a single Leave
	All Period timer. Leave All Timer must be larger than
	Leave Timer; the default is
	10000
	milliseconds.

This command sets the MSAP2000 AAMS’s leave all period timer for GVRP in milliseconds.

Switches join VLANs by making a declaration. A declaration is made by issuing a Join message using GARP. A Leave All message terminates all registrations. GARP timers set declaration timeout values.

The following example sets the Leave All Timer to 11000 milliseconds.

Figure 116 GARP Timer Leaveall Command Example

ras> switch garptimer leaveall 11000

27.8.5VLAN Port Show Command

Syntax:

switch vlan portshow [portlist]

where
[portlist]	= You can specify a single port <1>, all ports <*> or a list of
ports	<1,3,enet1>. You can also include a range of ports
	<1,5,6~10,enet1,e
	net2>.

This command displays the port’s VLAN settings.

The following example shows the settings for ADSL port 1.

Figure 117 VLAN Port Show Command Example

ras> switch vlan portshow 1 port pvid priority frametype gvrp

----- ---- -------- --------- ----
1	1	0	all

203