ZyXEL Communications manual Console Port via MSAP2000 MPM, Default Ethernet Settings

MSAP2000 AAMS User’s Guide

2.1.3 Console Port (via MSAP2000 MPM)

For local management, you can use a computer with terminal emulation software configured to the following parameters:

•VT100 terminal emulation

•115,200 bps

•No parity, 8 data bits, 1 stop bit

•No flow control

Connect the male 9-pin end of the console cable to the console port of the MSAP2000 SHELF. Connect the female end to a serial port (COM1, COM2 or other COM port) of your computer. Use a USB-to-COM port convertor if there’s no COM port available on your computer. Most USB-to-COM port convertor requires a driver, please make sure the USB-to-COM port convertor can be recognized by your computer before connecting to console port. Refer to UI operation manual for user name, password, and more details.

2.1.3.1 Default Ethernet Settings

The factory default negotiation settings for the Ethernet ports on the MSAP2000 AAMS are:

•Speed: Auto

•Duplex: Auto

•Flow control: on

2.1.4Notes About MDFs (Main Distribution Frames)

An MDF is usually installed between end-users' equipment and the telephone company (CO) in a basement or telephone room. The MDF is the point of termination for the outside telephone company lines coming into a building and the telephone lines in the building.

27