ZyXEL Communications MSAP2000 Alarm Profile Delete Command, Permitted to occur within 15 minutes

MSAP2000 AAMS User’s Guide

<atuc ess> <atur ess>

<atuc fast rateup> <atur fast rateup>

<atucinterleave rateup> <atur interleave rateup>

<atuc fast ratedown> <atur fast ratedown>

<atucinterleave ratedown> <atur interleave ratedown>

<init fail enable>

=The number of Errored SecondS that are permitted to occur within 15 minutes.

=A rate in kilobits per second (kbps). If a fast mode connection’s upstream transmission rate increases by more than this number, then a trap is sent.

=A rate in kilobits per second (kbps). If an interleave mode connection’s upstream transmission rate increases by more than this number, then a trap is sent.

=A rate in kilobits per second (kbps). If a fast mode connection’s downstream transmission rate decreases by more than this number, then a trap is sent.

=A rate in kilobits per second (kbps). If an interleave mode connection’s upstream transmission rate decreases by more than this number, then a trap is sent.

=“1” sets the profile to trigger an alarm for an initialization failure trap. “2” sets the profile to not trigger an alarm for an initialization failure trap.

<atuc ses> <atur	=	The number of Severely Errored Seconds that are
ses>		permitted to occur within 15 minutes.
<atuc uas> <atur	=	The number of UnAvailable Seconds that are
uas>		permitted to occur within 15 minutes.

The alarmprofile set command configures ADSL port alarm thresholds. The MSAP2000 AAMS sends an alarm trap and generates a syslog entry when the thresholds of the alarm profile are exceeded.

Configure alarm profiles first and then use the alarmprofile map command to set the MSAP2000 AAMS to use them with specific ADSL ports.

The following example sets an alarm profile named SESalarm that has the MSAP2000 AAMS send an alarm trap and generate a syslog whenever the upstream connection’s number of severely errored seconds exceeds three within a 15 minute period.

Figure 101 Alarm Profile Set Command Example

ras> adsl alarmprofile set SESalarm 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 3 0 0 0

26.3.16Alarm Profile Delete Command

Syntax:

adsl alarmprofile delete <profile>

183