Samsung LN46E550 user manual Picture Options, Picture Reset Reset Picture Mode / Cancel, Atv, Av

Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and center of the screen may cause image retention (screen burn) which are not covered by the warranty.

Picture Options

OO MENUm→ Picture → Picture Options →

ENTERE

Picture Options

Color Tone	: Normal	►
Size	: 16:9
Digital Noise Filter	: Auto
HDMI Black Level	: Normal
Film Mode	: Off
	U Move E Enter	R Return

■■ Color Tone (Cool / Normal / Warm1 / Warm2)

✎✎ Warm1 or Warm2 will be activated when the picture mode is Movie.

✎✎ Settings can be adjusted and stored for each external device connected to an input on the TV.

■■ Size: Your cable box/satellite receiver	P.SIZE
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnification.

Zoom2: Use for a stronger magnification.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.

4:3: Sets the picture to basic (4:3) mode.

✎✎

Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are input.

✎✎NOTE

xx After selecting Zoom1, Zoom2 or Wide Fit:

1.Press the ► button to select Position.

2.Press the ENTEREbutton.

3.Press the ▲ or ▼ button to move the picture up or down.

4.Press the ENTEREbutton.

5.Press the ► button to select Reset.

6.Press the ENTEREbutton to reset the picture to its default position.

xx HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

xx Settings can be adjusted and stored for each external device you have connected to an input on the TV.

Input Source	Picture Size
ATV, AV,	16:9, Zoom1,
Component (480i, 480p)	Zoom2, 4:3
DTV(1080i),	16:9, 4:3, Wide Fit,
Component (1080i, 1080p),	Screen Fit
HDMI (720p, 1080i, 1080p)

■■ Digital Noise Filter (Off / Low / Medium / High / Auto): If the broadcast signal received by your TV is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen.

✎✎ When the signal is weak, try other options until the best picture is displayed.

■■ HDMI Black Level (Low / Normal): Selects the black level on the screen to adjust the screen depth.

✎✎ Available only in HDMI mode (RGB signals).

■■ Film Mode (Off / Auto): Sets the TV to automatically sense and process film signals from all sources and adjusts the picture for optimum quality.

✎✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i / 1080i) and HDMI (1080i).

Picture Reset

(Reset Picture Mode / Cancel)

Resets your current picture mode to it's default settings.

■■ Reset Picture Mode: Returns all picture values in the currently selected mode to the default settings.

English 15

03 Basic Features

[LD550-ZA] BN68-04313A.indb 15

2012-01-20

�� 11:18:53