Connecting to an Antenna, Getting Started

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Connecting the power cord and antenna.

✎✎When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TV will be broken off.

✎✎ The position of power input port may differ depending on the model.

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic			POWER
settings. Press the POWERPbutton. Plug & Play is available only when the Input source is set to TV.			P
1	Selecting a language	Press the ▲ or ▼ button, then press the ENTEREbutton.
		Select the desired OSD (On Screen Display) language.
	Selecting Store Demo	Press the ◄ or ► button, then press the ENTEREbutton.
2	or Home Use	yy Select the Home Use mode. Store Demo Mode is for retail
		environments.
		yy To return the unit’s settings from Store Demo to Home Use
		(standard): Press the volume button on the TV. When you see the
3		volume in the OSD, press and hold MENU for 5 sec.
	Selecting an antenna	Press the ▲ or ▼ button, then press the ENTEREbutton. Select Air, Cable or Auto.
		✎✎In Cable mode, you can select the correct signal source among STD, HRC, and IRC
4		by pressing the ▲, ▼, ◄ or ► button, then press the ENTEREbutton.
	Selecting a channel	The channel search will start automatically.
		For more information, refer to Channel → Auto Program. (P. 12)

5		✎✎Press the ENTEREbutton at any time to interrupt the memorization process.
	Setting the Clock	Set the Clock Mode automatically or manually.
	Mode	✎✎If you select the Auto, set the daylight saving time.
6		Select the time zone where you live.
	Viewing the HD	The connection method for the best HD screen quality is displayed.
	Connection Guide
7	Enjoy your TV.	Press the ENTEREbutton.
	Enjoy your TV.	Press the ENTEREbutton.

If You Want to Reset This Feature...

OO MENUm→ Setup → Plug & Play → ENTERE

Setup

[LD550-ZA] BN68-04313A.indb 7

2012-01-20

�� 11:18:48