ZyXEL Communications MSAP2000 manual Load Factory Defaults, Reboot System

MSAP2000 AAMS User’s Guide

1Right-click the Backup Text Configuration Click here link and click Save Target As. Or:

Click the Backup Text Configuration Click Here link and then click File and Save as.

2In the Save As screen, choose a location to save the file on your computer from the Save in drop-down list box and type a descriptive name for it in the File name list box. Click Save to save the configuration file to your computer.

Note: See the chapters on commands to edit the configuration text file.

You can change the “.dat” file to a “.txt” file and still upload it to the

MSAP2000 AAMS.

20.5 Load Factory Defaults

From the Maintenance screen, use Restore Default Configuration to clear all MSAP2000 AAMS configuration information you configured and return to the factory defaults. Click OK in the following screen.

Figure 66 Confirm Restore Factory Default Settings

Click OK to begin resetting all MSAP2000 AAMS configurations to the factory defaults and then wait for the MSAP2000 AAMS to restart. This takes up to two minutes. If you want to access the MSAP2000 AAMS web configurator again, you may need to change the IP address of your computer to be in the same subnet as that of the default MSAP2000 AAMS IP address (192.168.1.1).

Figure 67 Restart After Load Factory Defaults

20.6 Reboot System

From the Maintenance screen, use Reboot System to restart the MSAP2000 AAMS without physically turning the power off. Press the Click Here button next to Reboot System to display the following screen.

127