Axis Communications manual AXIS P7214/P7210 Video Encoder Installation Guide, Package contents

AXIS P7214/P7210 Installation Guide Page 5

AXIS P7214/P7210 Video Encoder

Installation Guide

This installation guide provides instructions for installing a AXIS P7214/P7210 video encoder on your network. For all other aspects of using the product, please see the product’s User’s Manual, available on the CD included in this package, or from www.axis.com

Installation steps

Follow these steps to install the AXIS P7214/P7210 on your local network (LAN):

ENGLISH

1.Check the package contents against the list below.

2.Hardware overview. See page 6.

3.Install the hardware. See page 7.

4.Assign an IP address. See page 9.

5.Set the password. See page 12.

Package contents

Important!

This product must be used in compliance with local laws and regulations.

Item	Models/variants/notes
Axis video encoder models	AXIS P7214
	AXIS P7210
Power adapter models	AXIS P7214: Type PS-K
	AXIS P7210: Type PS-P
Mounting kit	AXIS P7214
	• 4 screws and 4 plugs to mount the encoder to a concrete wall
	AXIS P7210
	• 8 screws (for mounting with brackets)
	• 4 M6x20 screws for mounting in rack
	• 2 mounting brackets
	AXIS P7214/P7210
	• 4 Surface protection pads
	• Terminal block connectors (I/O: 6-pin connector, RS-485/RS-
	422: 2 x 2-pin connector for AXIS P7214; 8 x 2 pin connector for
	AXIS P7210, Power: 2-pin connector)
CD	AXIS Network Video Product CD, including product documentation,
	installation tools and other software
Printed Materials	AXIS P7214/P7210 Installation Guide (this document)
	Axis Warranty Document