wiz
Configures the IP parameters for the Eth0 interface. Shows the current configurati on and asks
for new values for the following parameters:
• Status of the int erface(ena bled or disabled)
• IPv4 method (dhcp or sta tic)
• IPv6 method (dhcp or sta tic)
• IPad dress,mask and gateway (if sta tic is chosen for eit her of the previous parameters)
• DNS Primary Server,Secon dary Server,D omain Name and Ho stname
After setting all parameters, confirm that all parameters are correct to save them.
Special Multi -session CommandsThe following commands require navigat ion to an enabled and configured po rtt o which one or
more usersare simult aneously connected. To get t o the port, enter the following command.
--:- / cli-> cd access/<serial_port_ID>
list_shared_session
List the users connected to th e shared serial port.
Syntax:
--:- <serial_port_ID> cli-> list_shared_session
kill_shared_session
Terminate the connection o fa u seron the port. The user is returned to the cli -> prompt.
Syntax:
--:- <serial_port_ID> cli-> kill_shared_session <username>
Example:
--:- <serial_port_ID> cli-> kill_shared_session admin@139
sendmsg
Send a message to a user connected to th e port.
Syntax:
--:- <serial_port_ID> cli-> sendmsg <username> <message>
Example:
Chapter 2: CLI Command Set 17