Agilent Technologies 5000 Series manual HARDcopyFORMat, Commands instead

5Obsolete and Discontinued Commands

:HARDcopy:FORMat

	(see page 530)
Command Syntax	:HARDcopy:FORMat <format>
	<format> ::= {BMP[24bit] BMP8bit PNG CSV ASCiixy BINary
	PRINter0 PRINter1}
	The HARDcopy:FORMat command sets the hardcopy format type.
	PRINter0 and PRINter1 are only valid when printers are connected to the
	oscilloscope's USB ports. (The first printer connected/identified is
	PRINter0 and the second is PRINter1.)
	The :HARDcopy:FORMat command is an obsolete command provided for compatibility to
N O T E
	previous oscilloscopes. Use the :SAVE:IMAGe:FORMat (see page 268),
	:SAVE:WAVeform:FORMat (see page 274), and :HARDcopy:APRinter (see page 196)
	commands instead.
Query Syntax	:HARDcopy:FORMat?
	The :HARDcopy:FORMat? query returns the selected hardcopy format type.
Return Format	<format><NL>
	<format> ::= {BMP BMP8 PNG CSV ASC BIN PRIN0 PRIN1}
See Also	• "Introduction to :HARDcopy Commands" on page 193

474 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference