Agilent Technologies 5000 Series manual MARKerY2Position, MARKerY1Position on, MEASureVSTOp on

3Commands by Subsystem

:MARKer:Y2Position

	(see page 530)
Command Syntax	:MARKer:Y2Position <position> [suffix]
	<position> ::= Y2 cursor position in NR3 format
	<suffix> ::= {mV V dB}
	The :MARKer:Y2Position command sets :MARKer:MODE to MANual, sets
	the Y2 cursor position and moves the Y2 cursor to the specified value.
Query Syntax	:MARKer:Y2Position?
	The :MARKer:Y2Position? query returns current Y2 cursor position. If the
	front- panel cursors are off an error is returned. This is functionally
	equivalent to the obsolete :MEASure:VSTOp command/query.
Return Format	<position><NL>
	<position> ::= Y2 cursor position in NR3 format
See Also	• "Introduction to :MARKer Commands" on page 204
	• ":MARKer:MODE" on page 205
	• ":MARKer:X1Y1source" on page 207
	• ":MARKer:X2Y2source" on page 209
	• ":MARKer:Y1Position" on page 211
	• ":MEASure:VSTOp" on page 491

212 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference