Agilent Technologies 5000 Series manual TRIGgerGLITchQUALifier, Query Syntax

3Commands by Subsystem

:TRIGger:GLITch:QUALifier

	(see page 530)
Command Syntax	:TRIGger:GLITch:QUALifier <operator>
	<operator> ::= {GREaterthan LESSthan RANGe}
	This command sets the mode of operation of the glitch pulse width trigger.
	The oscilloscope can trigger on a pulse width that is greater than a time
	value, less than a time value, or within a range of time values.
Query Syntax	:TRIGger:GLITch:QUALifier?
	The :TRIGger:GLITch:QUALifier? query returns the glitch pulse width
	qualifier.
Return Format	<operator><NL>
	<operator> ::= {GRE LESS RANG}
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:GLITch:SOURce" on page 354
	• ":TRIGger:MODE" on page 319

352 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference