Agilent Technologies 5000 Series manual TRIGgerCANSOURce

3Commands by Subsystem

:TRIGger:CAN:SOURce

(see page 530)

Command Syntax :TRIGger:CAN:SOURce <source>

<source> ::= {CHANnel<n> EXTernal} for the DSO models

<source> ::= {CHANnel<n> DIGital0,..,DIGital15} for the MSO models <n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

	The :TRIGger:CAN:SOURce command sets the source for the CAN signal.
	The source setting is only valid when :TRIGger:CAN:TRIGger is set to SOF
	(start of frame).
Query Syntax	:TRIGger:CAN:SOURce?
	The :TRIGger:CAN:SOURce? query returns the current source for the CAN
	signal.
Return Format	<source><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:MODE" on page 319
	• ":TRIGger:CAN:TRIGger" on page 333
	• ":TRIGger:CAN:SIGNal:DEFinition" on page 496

332 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference