Agilent Technologies 5000 Series manual TRIGgerTVSOURce, Return Format sourceNL

Commands by Subsystem 3

:TRIGger:TV:SOURce

(see page 530)

Command Syntax :TRIGger:TV:SOURce <source> <source> ::= {CHANnel<n>}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :TRIGger:TV:SOURce command selects the channel used to produce the trigger.

Query Syntax :TRIGger:TV:SOURce?

The :TRIGger:TV:SOURce? query returns the current TV trigger source.

Return Format <source><NL>

<source> ::= {CHAN<n>}

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:MODE" on page 319

•":TRIGger:TV:POLarity" on page 384

Example Code • "Example Code" on page 346

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 385